结合部切向接触刚度分形模型研究

根据球体与平面接触的切向接触刚度和粗糙表面的接触分形理论，从理论上首次建立了结合部切向接触刚度分形模型，该模型具有尺度独立性。通过对所建模型的数字仿真，直观地给出了结合部切向接触刚度与其影响因素之间的非线性关系，并与实验研究结果具有较好的一致性，从而说明了该模型是合理的。     

Ⅰ—Ⅲ混合型裂纹相变增韧分析

本文采用压力敏感准则和权函数法对相变增韧陶瓷Ⅰ－Ⅲ混合型裂纹的增韧效应进行了理论预测。分别给出了静止裂纹和定长扩展裂纹相变塑性屏蔽的理论表达式，结果表明：相变对静止裂纹有负屏蔽效应，并随ＫⅢ／ＫⅠ比值的增大而趋于零，对扩展裂纹的增韧结果除与材料的弹性模量，相变尾区高度和相变体积分数有关外，还与ＫⅢ／ＫⅠ的比值有关。     

DIRECT NUMERICAL SIMULATIONS ON THE TURBULENT FLOW PAST A CONFINED CIRCULAR CYLINDER WITH THE INFLUENCE OF THE STREAMWISE MAGNETIC FIELDS1)

绕流是托卡马克装置中液态包层内常见的流动形态,对流场与热量分布有着重要的影响.本文通过直接数值模拟(DNS),研究了不同磁场强度下$Re=3900$的圆柱绕流,分析了磁场强度对于湍流尾迹的影响.无磁场情况下,直接数值模拟的结果与前人的实验及模拟结果吻合很好.圆柱下游的尾迹中,随着流向距离的增大, 流向速度剖面逐渐从U型进化呈V型, 并慢慢趋于平缓,这表明尾迹中的流动结构受圆柱影响逐渐减小.圆柱后方两侧的剪切层中,由于Kelvin-Helmholtz不稳定性的影响,可以清晰地看到小尺度剪切层涡的脱落.通过对无磁场的计算结果施加流向磁场,本文计算了哈特曼数($Ha$)分别为20, 40和80的工况,以研究磁场效应对于湍流的影响.结果表明磁场较弱时,流动依然呈三维湍流状态.随着磁场增强, 近圆柱尾流区受磁场抑制明显,回流区被拉长,剪切层失稳位置向下游转移.圆柱后方的涡结构由于受到竖直方向洛伦兹力的挤压作用,随着哈特曼数的增加尾迹区域逐渐变窄.相比于无磁场情况的涡结构,由于磁场的耗散作用,相应的涡结构尺度变小.该研究不仅扩展了现有磁场下湍流运动的参数范围,对于液态包层的设计及安全运行同样具有重要的理论指导意义和工程应用价值.     

高效液相色谱法测定榨菜中柠檬黄的不确定度评定

根据JJF1059～1999《测量不确定度评定与表示》对高效液相色谱法测定榨菜中柠檬黄含量的测定不确定度进行评定。通过对实验过程中样品的取样称量、使用仪器、标准物质、测试过程中的随机因素以及标准工作曲线的拟合等因素进行分析,计算了不确定度分量和合成不确定度。榨菜中柠檬黄含量的测定结果为（0．0375±0．0050）g／kg,k=2。     

近紫外LED激发荧光粉Ba0.11Sr2.89-2xCexNaxAlO4F发光特性

采用高温固相法反应制备Ba0.11Sr2.89-2x Ce x Na x AlO4F(x=0.01,0.02,0.05,0.07,0.10,0.15)荧光粉。Ba0.11Sr2.89AlO4F体系中存在Sr(1)2+和Sr2+(2)两个格位。Sr2+(1)离子位于Wyck.4a格位,为十配位多面体构型。Sr2+(2)离子位于Wyck.8h格位,为八配位的多面体构型。研究了Ba0.11Sr2.89-2x Ce x Na x AlO4F荧光粉的紫外-可见激发、发射光谱、荧光寿命及能量传递过程,讨论并指认了Ce3+在上述两个格位中的激发带位置及能级重心,发射光谱曲线分别由两个~463,~505和~550 nm宽带发射构成。随着Ce3+浓度增加,长波发射~550 nm逐渐增强,而色品坐标(x=0.199,y=0.351)蓝绿区逐渐变化到黄绿区域(x=0.389,y=0.489)。     

Arylidene Copolyether Sulfones. I. Synthesis and Characterization of Some New Copolyether Sulfones Containing Dibenzylidene Cyclopentanone Moieties

Abstract

New copolyether sulfones containing 2,5-bis(4-oxo-benzylidene)-cyclopentanone moieties were prepared in the conventional literature manner by condensing the dipotassium salts of 2,5-bis(4-hydroxyphenzyl- idene)cyclopentanone (I) and 2, 2-bis(4-hydroxyphenyl)propane (Bisphenol A, III) with 4,4′-dichlorodiphenyl sulfone (II), or by condensing the dipotassium salts of I with chlorine-terminated Bisphenol A-4,4′-di-chlorodiphenylsulfone copolymers (V). The resulting copolyether sulfones were confirmed by IR, viscometry, DSC measurements, thermooptical (TOA), and thermogravimetric analysis (TGA).     

Fabrication of Gene Carrier via Self-assembly of Poly[(dimethylamino)ethyl Methacrylate] and Poly(aspartic acid)-grafted-Poly(ethylene glycol)

A biocompatible complex has been prepared as gene carrier via electrostatic interaction, which is composed of a polycation, that is, poly[(dimethylamino)ethyl methacrylate] end-capped with cholesterol moiety (Chol-PDMAEMA₃₀), along with a polyanion named poly(aspartic acid)-grafted-poly(ethylene glycol) (PASP-g-PEG). The complexes have less cytotoxicity compared to the case of alone Chol-PDMAEMA₃₀ or branched polyethylenimine (PEI) system.

In the present study, biocompatible complexes have been prepared as gene carrier via electrostatic interaction, which is composed of a polycation, that is, poly[(dimethylamino)ethyl methacrylate] end-capped with cholesterol moiety (Chol-PDMAEMA₃₀), along with a polyanion named poly(aspartic acid)-grafted-poly(ethylene glycol) (PASP-g-PEG). We first synthesized polysuccinimide (PSI) via condensation polymerization of aspartic acid, and then used PEG-NH₂ to react with the partial pentacyclic rings of PSI to yield a kind of graft copolymer polysuccinimide-grafted-poly(ethylene glycol) (PSI-g-PEG). After hydrolysis of the residual succinimide units, a new biodegradable and biocompatible graft copolymer PASP-g-PEG was prepared successfully. Chol-PDMAEMA₃₀ was synthesized via oxyanion-initiated polymerization, as reported in our previous literature. We investigated the interactions between every pair among calf thymus DNA, Chol-PDMAEMA₃₀, and PASP-g-PEG by agarose gel retardation assay. The results indicate that the prepared complexes could completely bind DNA and may become more stable during systemic circulation. The complexes have less cytotoxicity compared to the case of alone Chol-PDMAEMA₃₀ or branched polyethylenimine (PEI) system. Furthermore, the physicochemical properties of the complexes were also investigated by zeta potential, transmission electron microscopy (TEM) and dynamic light scattering (DLS) measurements. These biodegradable and biocompatible polymeric carriers have potential applications in gene delivery.     

量子点单光子源的光纤耦合

半导体量子点在低温下产生谱线细锐的激子发光可制备单光子源.光纤耦合可避免低温共聚焦装置扫描定位和振动影响,是实现单光子源即插即用和组件化的关键技术.在耦合工艺上,基于微区定位标记发展出拉锥光纤与光子晶体腔或波导侧向耦合、大数值孔径锥形端面光纤与量子点样片垂直耦合等技术;然而,上述工艺需要多维度精密调节以避免柔软光纤的畸形弯曲实现对准和高效耦合.陶瓷插针或石英V槽封装的光纤无弯曲且具有大平滑端面,只要与单量子点样片对准贴合就可保证垂直收光, V槽封装的排式光纤还可通过盲对粘合避免扫描对准,耦合简单.本文在前期排式光纤粘合少对数分布Bragg反射镜(distributed Bragg reflector, DBR)微柱样片实现单光子输出基础上,经理论模拟采用多对数DBR腔提升样片垂直出光和光纤收光效率,使光纤输出单光子计数率大大提升.     

镓铟锡液滴撞击泡沫金属表面的运动学特性研究

常温下为液态的镓铟锡合金以其优异的导热性能在具有特殊要求的传热领域有着重要的应用价值,与传统流动介质相比较大的表面张力使得其产生的流动现象必有所区别.本文研究镓铟锡所形成的液滴撞击泡沫金属表面后所产生的铺展、回缩及回弹现象.采用高速相机拍摄液滴投影轮廓随液滴运动的变化过程,并通过图像处理获得不同撞击速度、底板表面孔径下的液滴铺展系数、中心位置轮廓高度以及液滴回弹后在空中的振动特性.研究结果表明:具有较高表面张力的镓铟锡液滴的铺展系数随无量纲时间的变化在铺展初始阶段仍满足常规流体的1/2次幂关系,只在铺展后期与底板的无量纲孔径有关系;液滴的最大铺展系数在较小无量纲孔径底板大于在光滑镍板,且随底板无量纲孔径增大而逐渐减小;在回弹过程,由于底板孔隙结构的存在使得液滴回弹后在空中的振动呈现3种形态:规则的横向和纵向振动、带旋转的横向和纵向振动以及旋转振动;最后,通过对振动频率的拟合和分析,进一步拓展了传统振动频率理论公式在非规则振动过程预测中的应用.